LCN 4040XP

LCN4040XP - Heavy Duty Door Closer

The 4040XP is LCN’s most durable heavy duty closer designed for the most demanding, high use and abuse applications. Stronger, smarter and built for the real world. The LCN 4040XP sets a new standard for reliability, longevity and value with a beefier design and extraordinary performance testing that goes far beyond industry requirements. We built the 4040XP from the inside out, combining tougher, bolder construction with proven LCN technology. The result is a closer that’s stronger, smarter and delivers remarkable value in a variety of applications.

Product Overview

• The new LCN 4040XP replaces and retro fits the 4041 closer.
• Shipped with regular arm for hinge side (pull side) and top jamb mount (push side), standard plastic cover, and self reaming and tapping screws
• For interior doors to 5'0" and exterior doors to 4'0"
• Adjustable from size 1 through size 6 and is shipped set to size 3
• UL and cUL listed for self-closing doors without hold-open
• 4040XP can be used with all 4041 accessories
• Closer meets ADA requirements.

Features and Benefits

• 44% increased bearing load capacity
• Strongest pinion ever- at 3/4” journal diameter
• Widest bearing ever- at 5/8”
• Stronger pinion teeth
• New V-shield™ seal with 20% longer life
• XP = eXtra Protection in real world applications
• Cast Iron
• Forged Steel Arm
• Double Heat Treated Steel Pinion
• All Weather Fluid
• Non-Handed
• LCN® Fast™ Power Adjust
• Fast & Accurate Installation
• UL & cUL Listed
• Tested and certified under ANSI Standard A156.4, grade one

Technical Specifications

• 4040XP closer shipped with EDA arm, standard plastic cover, and self reaming and tapping screws
• Non-sized cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”
• Closer can mount hinge side, top jamb, or parallel arm (with PA bracket) on either right or left swinging doors
• Closers to meet ADA requirements
• Standard or optional custom powder coat finish
• Optional plated finish on metal cover, arm and fasteners
• Optional SRI primer for installations in corrosive conditions is available with powder coat only
• UL and cUL listed for self-closing doors without hold-open
• 4040XP can be used with all 4040 accessories

Butt hinges Should not exceed 5" (127 mm) in width Auxiliary stop Recommended at hold open point or where a door cannot swing beyond 120° Reveal Arm type Reveal Max opening Regular Arm 2 9⁄16" Up to 120° Long Arm 4 13⁄16" Up to 120° Hold Open Arm 2 9⁄16" Up to 120° Hold Open Long Arm 8" Up to 120° Top rail § Requires 1 1 ⁄4" (32 mm) minimum § 2 1 ⁄4" (57 mm) minimum with closer on plate, 4040XP-18TJ § 3" (76 mm) minimum with closer on plate, 4040XP-18G Head frame § Less than 3 1 ⁄2" (89 mm) requires plate, 4040XP-18TJ § With flush ceiling, use plate, 4040XP-18G. Either plate requires 1 3⁄4" (44 mm) minimum Maximum opening § Templating allows up to 120° § Hold open points 85° up to 120° with Hold Open Arm Delay action § Incorporates standard 4041 cylinder § Delays closing from 120° to 70° § Delay time adjustable up to approximately 1 minute