Hager Roton 780-210 Continuous Hinge - Heavy Duty, Full Surface

SKU:
780-210 HD
Weight:
4.00 LBS
Shipping:
Calculated at Checkout
  • Hager Roton 780-210 Continuous Hinge - Full Surface
  • Hager Roton 780-210 Continuous Hinge - Full Surface
  • Hager Roton 780-210 Continuous Hinge - Full Surface
$185.45

Description

logo-hager.jpg

Hager Roton 780-210 Continuous Hinge - Heavy Duty, Full Surface

Hager Roton continuous geared hinges are designed to provide superior performance you can rely on in high-traffic areas because they use a unique rotating joint, not a pin. This minimizes lateral wear on the hinge while evenly distributing door weight along the full length of the frame. Roton continuous geared hinges are an ideal choice for new construction or retrofit applications.

Door And Frame Preparation - All Roton Continuous Geared Hinges are surface-applied. Cutout design and spacing coordination is thereby eliminated in both new construction and restoration work. Reinforcement plates are not required in doors or frames except where the gauge is too thin for the fasteners in relation to the door weight or where abusive operation is anticipated.

Door Closers - Conventional surface or concealed sliding closers may be used with Roton. (Note: Pivot type floor closers with a fixed, conflicting pivot point may not be used). Closers will last considerably longer, adjust to operating requirements more readily and show consistent settings due to the reduced operating forces of Roton hinging.

 

Product Overview

  • Can be used with any door and frame material
  • Security moldings
  • 1/32" (1 mm) inset

 

Technical Specifications

  • Clearance: 1/32" (1 mm) minimum recommended for hinge side plus standard lockside clearance. 15/8" (41 mm) minimum frame face required plus 3/16" (5 mm) rotational clearance
  • Fasteners: Dril-Kwik® screws and Sex bolts Length Options: Standard and Custom
  • Door Reinforcement: None required
  • Frame Reinforcement: None required to 200 lbs. Heavier weight use 16 gauge channel
  • Fire Rating: Up to 3 hr. metal and 90 min. wood composite (with studs)
  • Special Features: Can be used with any door and frame material, Security molding, 1/32" (1 mm) inset
View AllClose